High quality 100T Rough Terrain Crane RT100 CE and Ghost Certificate
Main Features:
1.Fullwheel drive, large ground clearance and strong offroad performance. It is suitable for off-road travel
2.Complete-extension, half-extension and complete-retraction outrigger operation, no-outrigger operation and driving with load
3.Fullwheel steering, short wheel base, small turning radius, strong maneuverability; it is applicable to driving and operation in a narrow field
4.The cab and operating room are integrated into one. Comprehensive lifting operation increases lifting capacity of the front.
5The utilization of network node control technique can realize intelligent fault diagnosis, facilitate the troubleshooting for the electrical system of the complete vehicle and improve the maintainability of the electrical system.
Technical Paramters
Type |
Item |
Unit |
Value |
Working performance |
Max. rated lifting weight × working radius |
kg.m |
100000×3.0 |
Max. lifting moment of basic boom |
kN.m |
3319 |
Max.lifting moment of longest boom |
kN.m |
1388 |
Max. lifting height of longest boom |
m |
45.6(to the center of head pulley ) |
Max. lifting height of jib |
m |
63 |
Dimensions |
Outline dimensions (L×W×H) |
mm |
14247×3620×3960 |
Distance between outriggers (longitudinal × transversal) |
mm |
8000×7900 |
Main boom length (completely retracted - completely extended) |
mm |
11500~43000 |
Jib length (completely retracted - completely extended) |
mm |
10800~18500 |
Main boom angle of elevation |
° |
-3~78 |
Swing range |
|
360°unlimited swing (Full range) |
Working speed |
Max.speed of single rope on the drum of main winch |
m/min |
126 |
Boom extension time |
s |
170 |
Boom retraction time |
s |
158 |
Boom derricking up time |
s |
82 |
Boom derricking down time |
s |
69 |
Swing speed |
r/min |
0~1.5 |
Hydraulic system |
Rated working pressure |
MPa |
30 |
Rated working flow |
L/min |
500 |
Hydraulic oil tank capacity |
L |
1200 |
Mass |
Complete vehicle kerb mass |
kg |
65000 |
Front axle load |
kg |
33200 |
Rear axle load |
kg |
31800 |
Traveling |
Max. traveling speed (forwards / backwards) |
km/h |
24/15 |
Wheelbase |
mm |
4600 |
Treads (front / rear) |
mm |
2860 |
Notes: Explanations to Lifting Load
1) The rated lifting load value given in the table is the maximum lifting capacity when the crane is set on solid and level ground. The load should not exceed 75 % of the tip-over load;
2) The total rated lifting load given in the table includes the weight of hook and slings;
3) The working radius given in the table is the actual value including the deformation amount of the boom, so lifting operation should be carried out as per working radius.
4) 75 % of the tip-over load takes into account wind force 6, i.e. lifting operation still can be carried out with fully-extended outriggers when the wind pressure reaches 125N/m2, but lifting operation with tyres or traveling with load are prohibited.